America's Best Inoculant

America's Best Inoculant™ has shown significant yield increases in all planting conditions. While inoculants have previously been recommended for use only in certain planting situations such as sandy soil, soils under stress, early planting and in fields not part of a corn-soybean rotation, America's Best Inoculant™ should be used in all soybean planting situations.

Directions for use:

Humus-based (Sterile)
Liquid
The humus-based form of America’s Best Inoculant™ may be applied to seed using one of these three methods of application.

1) Slurry application (outside of planter box).
Place contents of one bag into 5.5 pints of clean, cool water. Mix thoroughly. Then mix thoroughly with 1500 lbs. of soybean seed.
(Please note: it is best to mix in 50 lb. increments.)

For best performance, plant seed within 24 hours of application. Do not exceed 7 days without re-inoculating seed.

2) Sprinkle application.
Moisten seed in planter box with 3 ounces of water per 50 lbs. of seed. (Sterile form does not require moistening of the seed.) Add one bag of America’s Best Inoculant™ per 1500 lbs. of seed and mix until seed is completely covered.
(Please note: it is best to mix in 50 lb. increments.)

For best performance, plant seed within 24 hours of application. Do not exceed 7 days without re-inoculating seed.

3) Innoculating as you fill your planter.
A proportional amount of inoculant can be introduced to a flowing stream of seed and the process of the seed flowing will evenly disperse the inoculant on the seed.

The liquid form of America's Best Inoculant™ can be applied to seed using one of these three methods. The liquid form can be applied and will not gel at temperatures above 40 degrees.

1) Batch application.
Measure the appropriate amount of America's Best Inoculant™ for the amount of seed being inoculated. Apply uniformly over the seed and stir until all seeds are coated. Plant seed immediately for optimal performance. Seed must be reinoculated if not planted within 24 hours.

2) Bulk and continuous application.
Remove bag from box and attach applicator cap and tubing. Hang bag from loop on bag and apply to seed per instructions inside of box.

3) In-furrow use.
Only use America's Best Inoculant™ in spray tanks that have been cleaned and are free of all chemical residue. Dilute America's Best Inoculant™ in water.

Recommended rate of water per acre is 10 to 20 gallons. The 105.82 oz. bladder of America's Best Inoculant™ will treat 12.5 acres.

America's Best Inoculant

Additional Information:

Specification Sheet (PDF: 341k)
Material Safety Data Sheet (PDF: 117k)
Continuous Flow Instructions (PDF: 253k)

Get Adobe Reader